We Offer Customised Solutions For Your City

Please select your city to proceed

Ahmedabad
Gandhinagar
Gurgaon
New Delhi
Noida

Ivantaa

Apply the 1MONTHFREE coupon code at checkout and get 1 Month Free. 🎉

How to Install a RO Water Filter at Home

Safe drinking water is something every household needs every day. When water is not properly purified, it affects health over time. A water purifier helps remove impurities, but it works correctly only when it is set up the right way at home.

To maintain the RO water purifier installed in your home, knowing how to install the filter is crucial. A poorly installed water purifier, with loose connections, inconsistent water flow, and incorrect placement, leads to a poorly working water filter.

This article serves as a water filter installation guide that explains how to install a purifier correctly at home without confusion.

How to Check Your Home Water Supply Before Installation

Before water filter installation, you must know what source of water you are getting for your home.

  • Municipal water – typically, this water has a consistent water pressure and low salt content.
  • Borewell water – this water contains high dissolved impurities and hardness, and typically has low water pressure.
  • Tanker water – the quality of tanker water often contains visible impurities and varies regularly.

Knowing the above information will help you install a water filter aligned with your current water source.

What Are All the Tools and Components You Need

It’s essential to gather all tools and parts before starting the water purifier filter installation process. The following items are required for this installation:

  • Adjustable wrench for tightening fittings.
  • Drill and wall anchors for securing the water purifier to the wall.
  • Teflon tape (for sealing pipe joints to prevent water leakage).
  • Inlet valve and food-grade pipe (to control the flow of water into the water purifier and the delivery of purified water to your kitchen faucet).
  • RO + UV unit with storage tank (to filter and store purified drinking water).

Each component has a specific function; the inlet valve controls the flow of water into the purifier, the food-grade pipe is used to safely carry water to and from your home, and the multi-stage filters are responsible for filtering the water.

Poorly installed or missing parts could result in leaks at the connections or slow water flow from your kitchen faucet.

Selecting the Correct Installation Location

When possible, place the water filtration system as close to the water source as possible to provide a continuous supply of water during water filter installation. If installed as a wall-mounted unit, ensure that a strong mounting surface supports the weight of a full storage tank.

The power outlet should be located near the water filtration system so that the ultraviolet light will illuminate when you pour water from the storage tank. Finally, ensure that the slope of the drain pipe allows wastewater to drain away properly.

Step-by-Step Installation Process for an RO plus UV Water Filter

There are many different ways to install a RO + UV water filter, but this is the typical order in which installations are performed in residential homes:

  1. Turn off the main water supply.
  2. Attach the inlet valve to the cold water line.
  3. Attach the sediment filter to the inlet valve.
  4. Securely mount the purifier to the wall.
  5. Attach internal pipes as marked for water flow direction.
  6. Connect the drain pipe to the sink outlet.
  7. Connect the storage tank to the tap.
  8. Plug the purifier into a safe electric socket.

By completing the installation in this manner, you will have a good flow of water through the entire ro water purifier installation process, and you’ll avoid issues thereafter.

Initial Flushing, Testing, and Calibration

After your water purifier is installed, flush your unit for approximately thirty minutes, then discard the contents of the first tank. The purpose of this process is to remove any remaining fine carbon particles from inside your filter, and to also remove any cleaning agents or residues that may be present.

Make sure to check every joint in your installation for signs of leaking and ensure a steady flow of water. If your unit provides you with water quality readings, check that your readings are lower after being purified. Finally, make sure that the UV indicator is lit when water is being dispensed.

Electrical Safety and Power Management

Electricity is essential to the safe functioning of an RO UV water purifier. Use a grounded connection location and do not connect any electrical appliance that uses a high amount of electricity, like a microwave or a refrigerator, on the same circuit as the water purifier, because these could cause damage.

How to Avoid Common Installation Problems

Many issues arise from the failure to adhere to standard water purifier installation tips. For instance, if you don’t check the water pressure prior to installing, you will likely have low output.

Drainage plate location errors can cause backflow issues, so you should flush your system. If connections are loose, this can lead to leaks that could eventually go unnoticed.

Why Some Homes Choose RO Water Purifier Rentals

Many Indian households prefer RO UV water purifier rentals because they eliminate the troubles associated with maintenance. With rental services, customers don’t have to do any installation, service, or filter replacements by themselves. The monthly subscription cost covers everything, from installation to filter replacement to servicing.

Ivantaa Rentals provides RO + UV water purifier services that come with free installation, free servicing, and free regular filter replacements. You only need to pay a fixed, affordable monthly cost, and everything is automatically covered.

It’s ideal for households that want to have drinkable water at all times and do not wish to be bothered with the various issues involved with setting up the water purifier, or feeling tied down to a long-term owning commitment.

Conclusion

Correct installation determines the performance and longevity of your water purifier. You should monitor your water for leaks, taste, and flow during the first week of operation to assist in identifying possible service issues before they happen.

As long as your purifier is properly installed, the process of regularly changing the filtration system will be less cumbersome and will give you an ongoing supply of safe and pure drinking water.

If you are looking for an easier way to get safe drinking water at home, contact us to explore our RO + UV water purifier rental demo options and choose a plan that fits your needs.

FAQs

How long does water filter installation take?

Typically, the time required to install a water filter will range from 30 to 45 minutes. If the installation is taking longer than this time, then there is usually an issue with the installation being done correctly.

Yes, installing a water filter by yourself is possible if you are knowledgeable about the basics of plumbing. However, a lack of knowledge may lead to small mistakes being made that result in leaks and preventable loss of time.

If your tap water runs slowly, it is an indication that your water pressure is too low for an RO purifier. It requires a constant flow of water at a sufficient pressure in order to operate correctly.

The best location to install your water purifier in your home is near the kitchen’s water line, drain, and power outlet access; convenience takes precedence over concealment.

After the water purifier has been installed, pre-filters must be replaced every six to twelve months. If the pre-filters are replaced regularly on time, this will extend the longevity of the RO membrane.

IVANTAA

Welcome

Log in or sign up to manage your orders and account details.

+91

By continuing, you agree to our Terms & Conditions and Privacy Policy.

IVANTAA

Welcome

Enter OTP sent to

30s remaining |

IVANTAA

Complete Your Profile